REL
Restricted Electrical Licence Course
Get qualified to undertake basic electrical work with our restricted electrical licence (REL) short course. Earn a nationally recognised electrical qualification and take a step closer to becoming a registered electrical contractor.
Restricted Electrical Licence
Cost
$2,495.00
Duration
5 days
Course Outcomes
Upon completion you will receive a Nationally Statement of Attainment in the Units Completed
OVERVIEW
This restricted electrical licence course gives you the skills and knowledge needed to perform routine electrical tasks as part of your everyday work. Since working with electrical equipment is common in many industries (including construction, heating, plumbing, engineering, and telecomms), obtaining a restricted electrical worker’s licence will enable you to take on more work and potentially earn more money.
Who is this course suitable for? This course is offered to eligible tradespersons who are employed but not currently an apprentice and are required to undertake electrical work as part of their daily duties. This could involve disconnecting and reconnecting electrical equipment connected to low-voltage installation wiring and locating and repairing faults on electrical systems within the scope of their associated trade.
Eligible trades for a restricted electrical licence include:
- Composite equipment service person
- Fitter and turner
- Gas fitter
- Instrumentation/process control technician
- Laboratory and scientific electrical equipment technician
- Mechanical fitter
- Plumber and drainer
- Refrigeration and air-conditioning equipment service person
- Telecommunications technician
Course Details
Major Training’s restricted electrical licence course QLD takes place across 5 days, with a mix of practical and theoretical teaching. You can take the course at one of our dedicated training facilities in Morayfield, Cairns, Virginia (Brisbane), Gold Coast, or Beresfield (NSW), and you’ll also be required to complete 12-16 hours of online study.
On successful completion of the course, you’ll be able to disconnect and reconnect appliances, attach cords and plugs, and locate and rectify domestic and commercial electrical appliances or electrical equipment used in your trade.
You’ll be issued a statement of attainment (SOA) for the units that have been completed. Students who do not complete the course in full will be issued a statement of attainment for the units of competency achieved.
What's INCLUDED:
Entry Requirements
Students must apply for a training permit before being enrolled in the course. This can be obtained from the Electrical Safety Office (ESO). Once you have completed the training course, you must then apply for a restricted electrical licence with the ESO by providing:
- Contact details
- Electrical work you wish to perform
- Details of any previous work licences
- Relevant qualifications and competencies
Applicants must demonstrate competency in the area they are working and with the relevant equipment, which may include qualifications such as a Certificate III or IV in relevant trades. Your statement of attainment from Major Training will demonstrate your competency.
To get your restricted electrical licence, you’ll also need to prove training in safety certifications, such as current CPR and electrical safety training. You may also need to provide a letter of support from your employer demonstrating an occupational need for the licence. Self-employed persons may need to provide a statutory declaration.
Restricted electrical (REL) course
A restricted electrical licence is a qualification that allows individuals to perform specific electrical tasks within a limited scope under the supervision of a fully licensed electrician. This licence provides the necessary skills and knowledge to handle electrical work safely and competently within the designated field.
Holding a restricted electrical licence demonstrates expertise in carrying out electrical tasks while adhering to regulatory guidelines and safety standards. Obtaining a restricted electrical licence requires specific competency training from a Registered Training Organisation (RTO) like Major Training.
Possible Roles
Potential wages could be in the region of $80,000 to $100,000 per year
Delivery Options
Utilise Major's well-equipped sites across South East Queensland (SEQ) for your training needs. We have popular industry courses running weekly.
Major also run courses in Northern NSW. Contact us today to learn more about undertaking a course in Northern NSW.
Course Details
Restricted Electrical Licence
When: Once a month from Monday to Friday
Duration: 12-16 hours of online training PLUS five-day face-to-face training to undertake at a Major site (Cairns or Morayfield). IMPORTANT: The online assessment must be completed prior to attending training, failure to complete it in time will result in cancellation of enrolment.
Delivery: Blended learning, online theory with face-to-face practical and assessment.
*CSQ funding may be available pending eligibility criteria.
Training Locations
What You'll Pay
Restricted Electrical Licence:
$2,495.00
Restricted Electrical Licence
Funded Options
CSQ Funding
Amount Funded: $POA
Student Gap Fee (what you will pay): $POA
Learn More about CSQ Funding here; CSQ Funding
Study Now Pay later
Study Now, Pay Later options are available for this course. Please see here for more information; Study Now, Pay Later
Student Support
Study Information
View our comprehensive resource hub and explore more information about payment options, student support, credit transfer/RPL (Recognition of Prior Learning), assessment methods, and the wealth of resources available to enhance your educational journey.
We accept a range of payment options:
- Credit Card via our secure payment gateway
- Study Now and Pay Later with up to 12 Months Interest-Free -> Learn More Here
- AfterPay: Pay in 4 easy installments -> Learn More Here
At Major Training Group, we aim to ensure that everyone gets the most out of their studies and that is why students have access to a range of support options to help them along the way. They include:
- Additional practical training sessions
- Extended learning time
- Alternative training methods and resources
- Access to our experienced staff for one-on-one training
- Recognition of previous learning and experience to speed up the process.
Students with prior industry experience may be eligible for RPL. Students may also qualify for credit transfer if they can demonstrate prior qualifications and/or statements of attainment. You can learn more about credit transfer and RPL
We use a variety of assessment methods including;
- Online
- Paper
- Video
- Q&A
- Demonstration
- Short written answers
- Longer written answers
- Third-party observation
- Knowledge skills observation
- Employer reports
Please read our complete
Next Available Courses:
Available Options
| Dates | Location | Stock | Price | |
|---|---|---|---|---|
| 2026-09-07 | YATALA | 4 in stock | $2,495.00 | |
| 2026-10-05 | YATALA | 6 in stock | $2,495.00 | |
| 2026-11-02 | YATALA | 6 in stock | $2,495.00 |
Frequently Asked Questions
Popular Industry Courses
Book into another industry course in high demand.
Why Our Students choose to study with major
Students Each Year
Over 10,000 students complete their training with us every year!
Student Pass Rate
We maintain an impressive 95% pass rate and offer additional support where needed to ensure every student's success.
RTO for flexible delivery options
Our commitment to flexible delivery options allows you to train on your terms.
Years Experience in Training
Leading the way in real-world training for the Construction, Automotive and Engineering Industries for over 2 decades.
Shoutout to Mal also for putting the crane hook where we needed it 😁🤙
Thanks again guys!
My educator, Cathy Fendley, was absolutely fabulous. We had agreed-upon sessions once a week (and sometimes twice a week when needed), and she was always supportive, organised, and encouraging. Cathy helped me tremendously, especially with my case studies, making sure I fully understood the requirements and felt confident in my work.
She also went above and beyond by helping me find a placement closer to my location, which made a big difference for me. During my placement, she visited and gave me such a great morale boost — her support truly meant a lot.
I’m very grateful to have had Cathy as my teacher. She is a wonderful educator and a genuinely caring person. Highly recommend Major Training Group!
I also want to mention Thane. Even though he wasn’t my trainer, he was very friendly and always willing to help.
Great team, professional training, and a very welcoming environment. Highly recommended definitely more than 5 stars! ⭐⭐⭐⭐⭐
They also create a great environment with things like regular BBQs, which makes it a welcoming and supportive place to study. It’s clear they put real effort into looking after their students and building a strong community.
If you’re considering training here, you won’t regret it.
10/10
Got my HR license first go and can’t appreciate much more on how this course helped me though without work and no money coming and this was the only shot I had, I probably come back to get more certificates and tickets under my belt 👍👍
He was very informative and helpful.
Great course
Thanks
Kurt🤓🤓
He took the time to go over everything thoroughly, helping me rebuild my confidence and fine-tune my skills. His calm demeanor helped ease my anxiety. Thanks to Paul’s support, I was able to pass my test.
Thank you Paul, I appreciate the help to better my life!
Thank you again for your service.
Resources & News
Find out more about how we can help you
Talk to A COURSE Advisor
Earn your REL and get valuable Electrical industry experience with Major Training. Call us on 1300 790 822 to discuss your options or contact us using the enquire now form.
Get in TouchWith a Course Advisor